[omoove]

Sorry I lost page for my last posted question. It's about scrambled channels. I think I get the channels through Globecast. and the receiver is Sonicview HD8000.
According to the reply I got there is nothing I can do to fix the problem. What about the keys posted in this place, how do they work? And how do I input these numbers?
Thanks for the help.

[Captain K]

The only channels you will get are on DN 110 & 119 or True FTA channels like those on 123 or 97.

[Captain K]

here is a link to you other post. Scrambled Channels

as was noted there the channels you were checking on have been switched to Nag3 and you will not get them with your sonicview.

[omoove]

What are the keys for? I thought they will help me if I enter them (numbers) into the receiver to remove the codes that blocked the channels.

[Ladybbird]

Originally Posted by omoove

What are the keys for? I thought they will help me if I enter them (numbers) into the receiver to remove the codes that blocked the channels.

Read Captains posts again, you cant get these channels by changeing keys.
If you dont understand read this;

http://www.aaafta.com/forum/general-...html#post43756

Good luck

[woodcreeker]

You could try to manually enter keys.

You can find the latest keys here, generally, for GC

To do that, you will have to find the code menu in your receiver.

Be aware keys are 16 pairs of hexidecimal numbers, on two lines, so 8 pairs per line. And you have to enter them in exactly the right place. If you were fooling around in there already, let me know, you may have accidentally changed one of the numbers that you shouldn't have. Then I will have to get a file up for you for this to fix it. I forget which line index identifiers are in the Sonicview code menus for GC. They might start as 86 and 96 or something like that. All receivers seem to label the key lines differently, due to the way each receiver's databases work. The best way to look at those areas is to count the pairs of keys to enter, 8 pairs per line, and they usually fit in one place to the right and down. So, I would manually enter them from the bottom line up. Once you look at it, you will probably see what I mean.

I will include a sticky link for you on this.

[woodcreeker]

Here is a quiick guide I put up --> http://www.aaafta.com/forum/sonicvie...elp-guide.html

You will be looking to change the C1 01 00 keys for the GlobeCast provider instead of the Dish provider

I C/P that guide and kept it in the Dish provider format for more general instructions

BTW to find your old posts, click your name, and select Find More Posts by ...
Now if you save that link to your favorites, you will always be able to find your posts.

Hope This All Helps !!

[omoove]

my receiver shows 10: 11: and 20: 21: for the codes
So how do I enter the numbers?

[rajiv427]

Originally Posted by omoove

my receiver shows 10: 11: and 20: 21: for the codes
So how do I enter the numbers?

Make sure you are in the Key Setting Menu.

CAS--------------- Nagravision

Globecast----------< C1 01 00 >

10: Enter half set of the 00 or 86 Keys here.

11: Enter second half set of 00 or 86 Keys here.

20: Enter first half set of 01 or 96 Keys here.

21: Enter second half set 01 or 96 Keys here.

[omoove]

Thanks so much I have done that. Do I need to re-boost the receiver for it ro takes effect? or is it because of the new encryption N3? What should I do next?

[rajiv427]

Originally Posted by omoove

Thanks so much I have done that. Do I need to re-boost the receiver for it ro takes effect? or is it because of the new encryption N3? What should I do next?

Once you enter those keys then hit Exit.It will ask you if you want to save,select YES.

If some of the channel is still not working then those channel are N3.

[omoove]

I think all the channels are on N3 because all the channels are still having the $ sign and I can't watched them yet. Or what will happen if the keys are entered will the $ sign goes away or not? Or I should wait till N3 issue is resolved.
Thanks so much you are of great help.

[SolidBrass]

Originally Posted by omoove

I think all the channels are on N3 because all the channels are still having the $ sign and I can't watched them yet. Or what will happen if the keys are entered will the $ sign goes away or not? Or I should wait till N3 issue is resolved.
Thanks so much you are of great help.

There are lots of channels not on N3. Some PPV, especially adult, have gone, but On Demand and all the premiums are still there. Are you getting both S and Q on both 119 and 110?

[omoove]

No. What is S and Q? And I don't got those satellites (119 & 110). Can you sow me how to get them? I want someone who can show me how to install the dish properly.
Thanks for the help

[Ladybbird]

Originally Posted by omoove

No. What is S and Q? And I don't got those satellites (119 & 110). Can you sow me how to get them? I want someone who can show me how to install the dish properly.
Thanks for the help

OK let me help you here, what sort of dish and LNB, and I will direct you to a link to start a new thread in the correct section so you get all the help you need for your dish. ok?

[SolidBrass]

Great idea. Sounds like we don't have enough information to address the problem.

[Ladybbird]

Originally Posted by SolidBrass

Great idea. Sounds like we don't have enough information to address the problem.

Im stumped, hes disappeared again??? He has done this before without getting the help he needs. ah well.

[omoove]

I think I get the answer to my question S stands for strenght and Q is for Quality.
I have 90mm dish and the LNB is single.
Thanks hope you will able to help me.
Thanks for the help.

[Ladybbird]

Originally Posted by omoove

I think I get the answer to my question S stands for strenght and Q is for Quality.
I have 90mm dish and the LNB is single.
Thanks hope you will able to help me.
Thanks for the help.

OK, Im going to start a thread for you and I will copy your posts and put them there.

this is the link to your new thread;

http://www.aaafta.com/forum/dishes-l...eeds-help.html

[Ladybbird]

Originally Posted by omoove

Solidbrass I got Intelsat AM 5 (97.0W)

Please continue on your other thread I started for you in the correct section.http://www.aaafta.com/forum/dishes-l...eeds-help.html