[stringca]

I am running an elliptical dish. I am tuned into 91 bev and 110 and 119 dish. I have a spare dish that I was gonna set up and see what else I could tune into. I have a viewsat ultra and I live in winnipeg manitoba canada. I was wondering if anyone out there has tried different satellites and if they would reccomend them. I was also wondering if I could get starchoice with the equipment that I have or if I needed something different?

[woodcreeker]

All the available satellites you can get are on the Lyngsat website. Some satellites require a large dish and a linear LNB. Your elliptical dishes utilize circular LNBs. Your two dishes were designed for specific orbits, and will require some ingenuity to get them to point at other satellites. One set is 82W and 91W, using the 110w and 119w spacings. Notice they are both 9 degrees apart. You already have of the primary one of those two.

Lots of guys are replacing their LNB in the 119 spot with the CB2008A LNB to get Anik F3 118.8W along with Echo 7, just so you know. The CB2008A LNB can get the lower level 11.7GHz ~ 12.2GHz signals from that satellite, as well as the 12.2GHz ~ 12.7GHz signals from Echo 7.

One idea they used to use was putting an LNB in 91 and an LNB in 110, which are 19 degrees apart, and tweaking these dishes for 129W and 148W, which are also 19 degrees apart. However, I believe DN stopped using 148W as of March 1st, so I do not know how many channels are being broadcasted from up there on 148W now.

You can check this post for satellites and their settings linked below:

http://www.aaafta.com/forum/dish-poi...-lnb-freq.html

A post about the Lyngsat Website is also linked below for you to check out:

http://www.aaafta.com/forum/faqs-gui...h-lyngsat.html

You can probably use it for something, just check around Lyngsat and see if there is any programming you find you are interested in.

As for the StarChoice, FTA 3rd party software has not attempted to break their encryption for testing.

Have Fun !!

[stringca]

thanks/i have been playing alot with differant angles/i put up another dish and not testing 82-91-110-119.will start to play with the CB2008A LNB or something simular.with all the channels i am getting i notice alot of hd channels. i am starting to look at hd recievers..any advice?...do they all need the 8psk module?..i have been thinking of the captain 8000hd do to price...but i know sometimes paying more means less in the long run...any help you could pass on would be greatly appreciated.thanks
string

[jgordonfan3]

I have a 5 lnb dish and I can pick up 82w 91w 110w 119w and 129w. All come in very well. 129w is good for HD channels, if you have HD reciever.

[hazwis]

no star choice sadly.....
the posts above are valuable, make sure you read them....

[stringca]

what size of dish do have?....

[stringca]

Originally Posted by jgordonfan3

I have a 5 lnb dish and I can pick up 82w 91w 110w 119w and 129w. All come in very well. 129w is good for HD channels, if you have HD reciever.

what size of dish do you have,,

[hazwis]

if you want HD you will need to get 82 bird and that does not require 8psk for now and 129 bird and that does require 8psk for reception.

[stringca]

i am tuned into 82 and am using a sonicview 8000 that i just bought.it dose not have the phaze shifter as of yet.i am in the process of upgrading my dishes.i was told in need more seperate dishes, instead of my one elicpical dish.the next set is to set them up: then the phase convertor.the cost is slowing me down,,,oh well..i have time

[veiwsat68]

Lots of guys are replacing their LNB in the 119 spot with the CB2008A LNB to get Anik F3 118.8W along with Echo 7, just so you know. The CB2008A LNB can get the lower level 11.7GHz ~ 12.2GHz signals from that satellite, as well as the 12.2GHz ~ 12.7GHz signals from Echo 7. <--that LNB is it old lnb i have an old lnb dishnet digital lnbf bsna5-506a can i use it to get 118.8 ? and in my vs ultra 2000 i dont have anik f3 in satellite setting